Contact Us
Search
cn
  • Process Technology
  • Stretch Blow Molding
  • Filling systems
  • Product treatment
  • Labeling
  • Packing systems
  • Plastic Granulators
  • Plastic Shredders
  • Washing Systems
  • Drying Systems
  • Plastic Separation Technologies
  • Plastic Pelletizers
  • Water Treatment Systems
  • Magnetic Separation Technologies
    • AIR Purification System
    Tea/Juice Extracting and Dispensing System
    Chilling System
    Water Treatment System
    • SY Series Linear Bottle Blowing Machine
    MX Series Rotary Bottle Blowing Machine
    • CGF Series Blowing-filling-capping combi-block
    X(X)GF Non-Carbonated Filling Line
    DXGF Carbonated Beverage Filling Line
    DXGF(T) Carbonated Filling Line
    RXGF Hot Filling Line
    GF High Precision Volumetric Filling Machine
    WJG Aseptic Filling Line
    ZXGF Moderate Temperature Filling Line
    GXGF 4-in-1 MONOBLOCK Filling Line
    RXGF(T) Glass bottle hot filling line
    3-Gallon, 5-Gallon Water Line
    • Plate Type Ultra High Temperature Machine
    Pipe Type Ultra High Temperature Machine
    PLJ Series Spray Cooling Tunnel
    DPL Series Bottle Inverse Sterilizer Machine
    WYH Series Carbonated Beverage Mixer
    • Rotary Hot Melt Adhesive Labeling Machine
    Label Sleeving Machine & Adhesive Labeling Machine
    • Robot Packing & Palletizing
    BS Series Full Auto Hot Shrinking Package Machine
    LP Series Bottle Unscrambler Machine
    • Plastic Granulator Replacement Blades
    Plastic Granulator Blade Sharpener Machines
    Extruded Plastic Granulator Machines
    Rigid Plastic Granulator Machines XL
    Wet Plastic Granulator Machines
    Standard Plastic Granulator Machines
    Rigid Plastic Granulator Machines
    • Elastic Plastic & Rubber Shredder Machines
    Rigid Plastic Shredder Machines
    Extruded Plastic Pipe Shredder System
    Plastic Film Shredder Machines
    Double-Shaft Plastic Shredder Machines
    Single-Shaft Plastic Shredder Machines
    Plastic Film Shredder Machine With Moveable Hopper
    Double-Shaft Plastic Shredder For PP/Pe Drums & Containers
    All-In-One Shredder & Granulator Machine
    • Sink Float Separation Tank
    Triple Row Sink Float Separation Tank
    Friction Screw Washer
    High Speed Friction Washer
    Hot Washer System
    Continuous Hot Washer System
    • Screw Press Dewatering Machine
    Vacuum Dryer For PET Recycling
    Thermal Dryer
    Centrifugal Dryer Dewatering Machine
    Plastic Film Screw Press Squeezer & Densifier System
  • Air Separation Technologies
  • Water Separation Technologies
  • Screen Separation Technologies
  • Debalers
  • Wet Plastic Bottle Label Remover
  • Plastic Bottle Label Remover
    • Air Separator
    PP PE Plastic Floating Separation Tank
    Triple-Row Sink Float Separation Tank
    Sink Float Separation Tank
    Disk Separator
    Trommel
    • Plastic Film Screw Press Squeezer & Densifier System
    Twin-Screw Plastic Extruder/Pelletizer
    Single-Screw Plastic Pelletizing Machines
    Clean PP PE Plastic Film Woven Bags Water Ring Pelletizer
    Plastic Pelletizer For Pet Flakes
    PP HDPE Rigid Plastic Flakes Pelletizing Machine
    Single Screw Pelletizer For PET Plastic Flakes
    Pelletizing Line For PP/PE Film Regrind From Washing Line
    EPS/Styrofoam Densifier Hot Melting Machine
    EPS/Styrofoam Densifier Hot Melting Machine
    • Dissolved Air Flotation (DAF) Water Treatment For Plastic Recycling
    Sludge Dewatering Machine
    • Magnetic Drum Separator
    Eddy Current Separator
    Advance Eddy Current Separator
    Magnetic Drum Pulley
  • All solutions
    • CSD beverage lines
    Juice beverage lines
    Tea, functional
    milk lines
    Condiment lines
    Pure water lines
    PET bottle recycling
    Filling machine video Recycling Machinery video
    Company Profile Service Certificate
    中文 English

    Product Center Product Center Screw Press Dewatering Machine

    Screw Press Dewatering Machine
    Screw Press Dewatering Machine
    Screw Press Dewatering Machine
    Screw Press Dewatering Machine
    Screw Press Dewatering Machine
    Screw Press Dewatering Machine

    Screw Press Dewatering Machine

    Our vacuum dryer system is optimized to increase the intrinsic viscosity of PET pellets during the drying process

    Contact Us

    Working principle

    At the center of our screw press dewatering machine is a screw shaft ofincreasing diameter, The screw shaft is most narrow at the opening where theplastic material enters via the vertical feeder. Surrounding the screw shaft is athick-walled, constant diameter outer tube lined with holes for water outlet.The common dewatering screw press for industrial recycling applications is 4-6 meters long, but can be increased or decreased based on yourspecifications. As the wet plastic feed stock is feed into the feeder, the screwshaft slowly rotates moving the plastic machine forward. The screw shaft willbecomes thicker in diameter, the plastic becomes more and more compacted against the outer casing wall. The moisture from the plastic material is squeezed out and exits the tiny holes.

    At the end of the horizontal screw press, the diameter of the screw shaft is only slightly smaller than the inside diameter of the outer casing. It’s through this narrow gap that the dried plastic material exits the screw press. A well manufactured screw press will bring moisture content to acceptable levels of below 15%.

    Quality Supervision

    ASG GROUP has advanced special processing equipment, strong technicalcapability, and can make use of modern CAD/CAM/CNC technology to guaranteeto manufacture perfect products.

    ASG success originates from the perfect appearance as well as delicateparticulars of its product.

    After precise and strict inspection of each bolt ,each process and eachequipment, we deliver exquisite works to our customers.

    More Products

    CGF Series Blowing-filling-capping combi-block
    CGF Series Blowing-filling-capping combi-block

    Taking 36000 BPH(500ml) water line for example, compared to traditional split technology, it can save morethan 30% wate…

    View Details
    X(X)GF Non-Carbonated Filling Line
    X(X)GF Non-Carbonated Filling Line

    XGF, XXGF series apply to the production of non-carbonated drink as pure water andmineral water, with optional capacity…

    View Details
    DXGF Carbonated Beverage Filling Line
    DXGF Carbonated Beverage Filling Line

    DXGF, DGF series apply to the production of carbonated drink, with optionalcapacity from 3,000 BPH to 30,000 BPH.

    View Details
    DXGF(T) Carbonated Filling Line
    DXGF(T) Carbonated Filling Line

    DXGF(T) series apply to fillingcarbonated beverage. It realizes the functionsof rinsing, filling,capping of aluminum ca…

    View Details
    RXGF Hot Filling Line
    RXGF Hot Filling Line

    RXGF 3-in-1 Unit and RXXGF 4-in-1 Unit applies to the production of tea andjuice, with optional capacity from 5,000 BPH…

    View Details
    GF High Precision Volumetric Filling Machine
    GF High Precision Volumetric Filling Machine

    GF Series 2-in-l filling machine is automatic filling andcapping. It is suitable for all kinds of edible oil, juice, se…

    View Details
    WJG Aseptic Filling Line
    WJG Aseptic Filling Line

    March 28, 2000 marks our pioneer in 36000BPH aseptic filling line, with support from Guangdong Robust Group. A firstPET…

    View Details
    ZXGF Moderate Temperature Filling Line
    ZXGF Moderate Temperature Filling Line

    Moderate temperature filling technology adopts nor-mal PET bottle and fillstea drinks and drinks and juice at 68 ℃ . Pr…

    View Details
    GXGF 4-in-1 MONOBLOCK Filling Line
    GXGF 4-in-1 MONOBLOCK Filling Line

    The GXGF SERIES 4-in-1 MONOBLOCK is aufomatically sterilizing, washing (blowing dust, filing and capping machine. It ca…

    View Details
    RXGF(T) Glass bottle hot filling line
    RXGF(T) Glass bottle hot filling line

    RBGF(T) series apply to filling non-carbonated beverage. It realizes the functions of rinsing,filling,capping of alumin…

    View Details
    ×

    Request
    Your
    Personalized
    Quote

    Tell us about your project requirements — our engineers will provide a tailored project solution within 48 hours.

    Send Inquiry